ISO 71921 A angular contact ball bearings

Retainer Material:Machined Brass; Axial Load Factor Y2:3.61; Roller Profile:Symmetric; Constant e:0.28; Enclosure:Open; Groove Width A:18 mm; Static Load Rating:1,610,000 N; Nr. of Holes:6; Fillet Radius/Chamfer:4 mm; Configuration:Double Row;

Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Width T(mm):16; Seals:ZZ (Double Shield); Volume Discount:Available; Type:Bearings with Housin; Height Indication:Height Selection; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Volume Discount:Available;

Revolution Frequency(rpm):7000; Series:Standard; Inner/Outer Ring Material:Steel; Premium shell bearing:No; Outer ring oil hole:No; Raceway Ring Shape:Needle Roller; Number of Raceway Ring Rows:Single Row; Specifications/Environment:Standard; Outer Ring Type:Flat; Case hardening (outer ring only):No

Bearing Part Number:6003; RoHS:6; Volume Discount:Available; Seals:DD (Contact Rubber S; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating; Flange Shape:Round Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Type:Bearings with Housin;

Cor - Static Load Rating:36194 lbf; Bolt Size:4 x M12; Bearing - Housing - Seal UPC:013992069481; Dimension P:0.6 in; Support Type:Round Flange; Bearing UPC:013992026064; Dimension T:11.3 in; Dimension R:9.5 in; Dimension H:2.9 in; Bearing Type:Split Cylindrical Re;

Shape:Flange Type; Bearing Retained:No; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):10; Type:Bearings with Housin; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):54; Bearing Material:[Steel] Steel;

e - ISO Factor8:0.38; Cup Part Number:14277; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:39.62 mm; db - Cone Backface Backing Diameter:39.88 mm; Series:14000; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; Design Units:Imperial; Y - ISO Factor9:1.57; B:22.385 mm;

Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Bearing Part Number:6007; Shape:Flange Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Shape:Flange Type;

Precision Grade Symbol:P4; Clearance sign:No; Size Standards:Metric System; Outer Ring Shape:Flat; Width(mm):7; I.D.(Ø):8; Retainer Type:Resin Forming; Outer Ring:With Outer Ring; Basic Dynamic Load Rating(N):3350; Seal, Shield Symbols:No;

Seals:ZZ (Double Shield); Flange O.D. H(φ):38; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Part Number:625; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; Width T(mm):10;

I.D.(Ø):60; Inner/Outer Ring Material:Steel; Outer Ring Shape:Flat; Type:Thrust Ball; Specifications, Environment:Standard; Outer Ring:With Outer Ring; Precision Grade Symbol:No; Holder Symbol:No; Retainer Type:Punching; Size Standards:Metric System;

a - Effective Center Location4:-0.48 in; C0 - Static Radial Rating:46200 lbf; Cg - Geometry Factor:0.0938; B - Cone Width:1.4550 in; da - Cone Frontface Backing Diameter:2.36 in; Aa - Cage-Cone Backface Clearance:0.08 in; Series:535; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller E

Unit, Type:Bearing unit; Basic Load Rating, Dynamic Rating(N):29100; Temperature Properties:Standard; RoHS:6; Cover Type:No; d:35; Seal:No; B:49.2; Days to Ship:6 Days; Bearing Inner Dia. Shape:Tapered hole adapter;

Cr - Dynamic Load Rating:96 kN; Radius Rs min:2.000 mm; Grease Reference Speed:4800 rpm; Outside Ring Width B:30.000 mm; C0r - Static Load Rating:71.5 kN; Clearance:C3; Features:Contact Seals; Weight:2.15 Kg; Oil Reference Speed:6900 rpm; Outside Diameter D:160.000 mm;

Grease Lubrication - M/N Seal:700 rpm; Y1 - Geometry Factor:2.43; Pre Install Clearance Max:0.170 mm; Engineering Group:Mounted Bearing; Dimension L Exp:5.62 in; Dimension E:6.44 in; Eng Internal Radial Clearance - Min:0.0063; Shaft Size  :4-1/2 in; Float:0.083 in; Shaft Tolerance:0.0050 i